Puncture Safe Herefordshire

Tyre Dealers in Leominster

Be the first to review

Unit 1
Ledicot Lane
Shobdon
Shobdon
Leominster
Herefordshire
HR6 9LT

Show map


Contact Numbers


Key Services

car tyres, puncture prevention, punture safe



About

  • INSTALLS quickly and cleanly
  • ELIMINATES most flats and blowouts
  • EXTENDS tyre life
  • PROTECTS against under-inflation
  • RETARDS dry rot and casing degradation
  • ASSISTS in heat reduction
  • PROTECTS the entire inner surface of the tyre
  • LASTS the life of the tyre

Puncture Safe

PunctureSafe is more than a tyre sealant, it is a tyre safety system that is "outstanding at sealing punctures"
Manufactured with FlexxaGel™ our most closely guarded trade secret!

WHAT IS PUNCTURE SAFE?
A tyre life extender/conditioner & permanent puncture prevention treatment

PunctureSafe is a special blend of polymers which coats and clings to the inner tyre. PunctureSafe is a "permanent" puncture prevention treatment and
tyre life extender/conditioner. Previously available products (and most current ones) have simply "fallen apart" at speeds of 40 mph and over, because they
were manufactured for the construction industries slow vehicles, but eventually made their way into the high-speed markets creating problems.
PunctureSafe is not a get you home product, it is applied before the puncture occurs, and permanently seals punctures as they happen. Once installed,
PunctureSafe not only seals punctures, it conditions the inner casing, preventing porosity leaks caused by tiny holes and cracks. In other words after
installing Puncturesafe the tyres maintain correct air pressure and the need to regularly top up with air is virtually eliminated, and with correctly inflated
tyres you get better fuel economy, your tyres also run cooler eliminating that problem of heat build-up. Tyres treated with PunctureSafe last considerably
longer, and cooler tyres are also less susceptible to punctures. PunctureSafe is water based for easy clean out if ever you need to do this and is installed
in minutes through the tyre valve with very little air loss and without removing any wheels.

What makes PunctureSafe different to tyre sealants that do not work?

Technology! Sealants have caused many problems that we at PunctureSafe have addressed. Using a highly evolved mixture of polymers, we have devised
a product that is more than capable of working in harmony with today's modern breed of vehicles. We use advanced chemistry in our process that bonds
the molecules of the sealant together at speeds up to 150mph. Previously available products, and most current ones, have simply "fallen apart" at around
55-65mph.

Performance and abilities and does not diminish with speed distance or time

PunctureSafe does not have any of the failings that previous and many present products have. Apart from drying and balling up in the tyre, the biggest
failings of traditional tyre sealants in a high speed tyre, was the inability to seal small holes, but the ability to seal a large dangerous hole or cut, because
they contained large chunks of chopped up rubber. Whereas PunctureSafe contains only tiny strands of coarse surface synthetic fibres that are stronger
than steel when they interlock tightly together, but will only positively seal small holes caused by puncturing objects up to 6mm in diameter, but only in a
hole that is in the tread area of the tyre, and that is shrinking in size because there is no cord damage (rubber recovery), which is 95% of today's
punctures in high speed vehicles. Anything bigger, or in the sidewall, with or without cord damage, and the PunctureSafe fibres just slowly bleed through
the hole, giving a controlled deflation, and usually with a halt or abrupt slow down in air pressure loss at the lower pressures of 10 to 15 psi (depending on
cord damage) which prevents damaged rims, and helps the driver maintain control possibly enabling continuation of the journey to remove the vehicle from
a possibly dangerous location.

Through our extensive research and development, our proprietary formulation has evolved far beyond that which is commonly known as a tyre sealant -
PunctureSafe is a tyre safety system outstanding at permanently sealing punctures and a true tyre life extender. PunctureSafe converts any pneumatic
tyre into a self-sealing tyre that will maintain air pressure. Puncturesafe has the ability to coat more of the inner surface of a tyre and rim without
succumbing to shear and stress associated with centrifugal force that is created within a high speed rotating tyre. PunctureSafe's attributes are
unparalleled in the history of the pneumatic tyre.

The PunctureSafe Research & Development Team developed an unrivalled proprietary process that has yet to be duplicated.

How it works

Once PunctureSafe has been installed, it lies dormant at the bottom of the tyre until the vehicle is first driven. Once driven a minimum of three to five
miles, PunctureSafe disperses throughout the inner tyre and forms a coating on the inner surface of the tyre assembly. In order to get sidewall coverage it
takes 1500+ miles to activate the FlexaGel to adhere to more of the inner tyre. The flexing of the tyre and the normal heat build-up allows PunctureSafe to
seek out and eliminate common air loss problems (referred to as porosity, air migration and bead leaks). Puncturesafe then transforms the tyre assembly
into a sealed air chamber, capable of maintaining proper air pressure. Thereafter, PunctureSafe conditions the rubber in order to retard dry rot and aging
(hardening) of the casing. One treatment will provide additional longevity and cooler running tyres for the legal tread life of the tyre.

The advanced technological sealing capabilities of PunctureSafe stand on guard to seal punctures as they happen. When a tyre is punctured, PunctureSafe coats the surface of the penetrating object, thus preventing air loss.

When the puncturing object is removed, the rubber recovers and the wound immediately closes, escaping air siphons PunctureSafe into the puncture.
The fibres entwine to create a clot that prevents any additional air from escaping. As the rubber recovers, the puncture closes and the strength of the tyre
holds the seal in place. The specialised polymers and fibres form the seal, thereby producing an airtight seal. The small amount of PunctureSafe that
penetrates through the puncture, past the belts and out through the tread area is referred to as a seal. Once exposed to the atmosphere, the seal begins
a systematic cure (another proprietary attribute from the PunctureSafe R&D Team). As the seal cures, it makes a positive secure seal that is impervious
to water, which totally protects the belts and inner casing from outside contaminants and corrosion.

PunctureSafe's proprietary formulation is one of our closely guarded secrets, which allows PunctureSafe to withstand heat and the shear forces created
within a rotating tyre. The thixotropic polymers stretches and recovers under mild to severe exposure of the adverse forces and continuously clings to the
inner tyre. The ability to coat the inner surface against adverse conditions and centrifugal force is the reason that PunctureSafe will not adversely affect a
balanced tyre assembly and does not lose the ability to provide protection for the tread life of the tyre.

PunctureSafe's abilities & performance is not diminished with speed, distance or time.

Sealing capabilities

If the tyre's integrity is weakened to a point where the tyre and casing are unsafe, PunctureSafe is designed to bleed and slowly release air pressure in a
controlled way if the puncturing object has severely damaged the inner structure.

PunctureSafe will not hide or mask a dangerous puncture regardless of how small the damage may be. If the integrity of the casing has been breached
and safety becomes an issue PunctureSafe is designed to allow air to escape in a controlled manner.

Coating and conditioning

PunctureSafe coats and clings to the inner tyre conditioning the inner surface, eliminating air migration caused by porosity and bead leaks.

It is imperative that the proper amount of PunctureSafe be installed in a tyre (refer to application chart). In order for PunctureSafe to function, the vehicle
should be driven approximately 3 to 5 miles (it is not required to immediately drive the vehicle). This initial driving allows the tyre to warm up and for
PunctureSafe to distribute. Puncturesafe will cover the crown area in the first few miles but it will take another 1500+ miles for the FlexxaGel to activate
giving more coverage of the sidewall. Unlike conventional tyre sealants, PunctureSafe has been developed to prevent migration from the sidewalls and the
tread area at high speeds. Once the initial driving/usage period has been attained; Puncturesafe cover more of the inner surface of the tyre.

PunctureSafe is a proprietary liquid coating that never deteriorates within the tyre and will continuously stand on guard to protect tyres against air loss for
the legal tread life of the tyre.

Will not cure or harden inside the tyre

People often ask, "If PunctureSafe cures from exposure to outside air, then why doesn't it cure by the air inside of the tyre?" PunctureSafe transforms the
tyre and rim into a sealed air chamber. As the vehicle is driven and the temperature of the tyre increases, a portion of the liquid base vaporises within the
tyre assembly's inner air cavity, as the tyre cools, the moisture condensates back into the formula. The inside air actually becomes part of the system.
The sealed air chamber prevents outside air from entering or inside air from escaping. Constant air pressure maintenance is not required.

Positive secure seal

When a tyre is punctured, PunctureSafe is forced against and around the puncturing object by the inner air pressure, thereby preventing air from escaping.
If the puncturing object is thrown out of the tyre by centrifugal force or is pulled out, the inside air forces PunctureSafe into the puncture and immediately
stops air loss. Special fibres entwine, forming a seal, then as the rubber recovers, aided by the tyre flexing as it rotates, the inner air pressure forces the
seal well into and through the puncture. Once PunctureSafe is exposed to the outside air, a curing process begins. The cured seal extends well into the
puncture, thus providing a seal that is impervious to water (rain, snow, mud, etc.). As this seal cures, it is transposed into a permanent rubberised seal,
protecting the inner casing and steel belts against contaminants entering the puncture.

Reviews

There are currently no reviews for this company

Leave your review of Puncture Safe Herefordshire

All fields are required. Your review will appear immediately.


Returning User

New User


By leaving this review, you agree with our Terms of membership

Products and Services

Puncture Safe Product Range

CARS HIGH SPEED GRADE: £60 + VAT PER 4 WHEELED VEHICLE. PROFESSIONALLY INSTALLED AT OUR PREMISES. IMMEDIATELY AND PERMANENTLY SEALS UP TO A 6MM PUNCTURE IN THE TREAD OF THE TYRE.

Price: 60 + VAT

Puncture Safe Product Range

HEAVY DUTY GRADE (UP TO 90MPH) SUPPLIED IN 20 LITRE CONTAINERS FOR SELF INSTALLATION ALONG WITH A CALIBRATED HAND PUMP AND INSTALLATION INSTRUCTIONS. IMMEDIATELY AND PERMANENTLY SEALS UP TO A 20MM PUNCTURE IN THE TREAD OF THE TYRE.

Price: £169 + VAT FOR 20 LITRES + £50 + VAT FOR A CALIBRATED HAND PUMP.